digitaltorque.com - Software Developer

Success! Domain digitaltorque.com was analyzed on Thursday 08. December 2016!

DomainsData.org: Software Developer

Title:

Software Developer
Age:

14 years old
Alexa Rank:

10,885,546
Total Sites Linking In (Alexa):

14
Domain's IP Country:

United States
Status Code:

OK
IP Address:

71.68.2.131
Description:
Keywords:

digitaltorque.com Whois Information:

1.

Domain Name:

digitaltorque.com
2.

Domain Age:

14 years old
3.

Name Server 1:

dns1.registrar-servers.com
4.

Name Server 2:

dns2.registrar-servers.com
5.

Created:

Saturday 27. July 2002
6.

Expires:

Thursday 03. August 2017
7.

Domain Registrar:

Enom, INC.

Website Important Html Tags:

TAG
TEXT
h4
Printing
h4
Fitting
h4
Count gears, lock gears, and sleeves
h4
Lubricating
h4
Printing
h4
Fitting
h4
Carry Lever Springs
h4
Adjusting; Eliminating bend
h4
Calibration
h4
Printing -- knobs, shafts, guide screws, bearing pins, and plates
h4
Threading
h3
Digit Axles
h3
Digit Dials
h3
Carry Pins
h3
Clearing Disc
h3
Carriage Casting
h3
Carriage Cage
h3
Carry Levers
h3
Breaking the Main Shaft ... Again
h3
Other parts
h3
Curta Function
h3
Video
h2
Completing Assembly of My 3D Printed Curta
h2
Follow me on Twitter
h2
About Me
h2
Blog Archive
h1
Software Developer
b
This can be very dangerous, so take all of the necessary precautions if you try this (eye protection, gloves, thick clothing, etc)!
li
bearing plate
li
anti-reversal plate, zero positioning lever, and anti-reversal lever
li
body support columns
li
some of the transmission axles and gears
div
This is just a quick post to say that I have
div
The digit axles were one of the easier prints out of the carriage assembly, but I did end up increasing the infill because the axles broke off in the carriage casting a few times when I put too much pressure on them. The main time this happens is when screwing the carriage ring onto the carriage cage.
div
I printed these with the wider section down on the print bed with a small amount of support because they have a cutout that helps them sit in the carriage cage. I ran them through a rough sanding to smooth them out some and then sprayed them with the PTFE lubricant I have been using.
div
The digit dials were pretty straight forward and almost as easy as the digit axles. They did require support for the geared portions. I printed them with the numbered dial downwards and the geared portions facing upwards. There were two types, some with a one-piece geared segment and some where it was two pieces. This is so that the teeth on the clearing ring don't interfere with normal operation of the Curta while the clearing ring is in one of its resting positions.
div
The only issue I had was that the hole for the pins that depress the carry levers were so close to the edge of the dial that it caused the outside diameter of the dials to not quite be a complete cylinder. I also sprayed these with the PTFE lubricant. I tried to keep the lubricant on the inside of the shaft only.
div
The carry pins exert pressure on the carry levers and I didn't want to have problems with them breaking off so instead of printing these vertically, I printed them horizontally. Due to their small size and their function, I printed them at 100% infill. I printed most of the carriage parts at 0.1mm layer height, but I took special care to print these at that layer height so they were rounder when printed horizontally. A small bit of filing was necessary to fit these. I estimated the distance to insert them into the digit dials and then later fine tuned it when the dials were placed onto their axles and seated into the carriage cage.
div
The clearing disc was interesting. I printed it upright which meant lots of support underneath it, but I wanted to keep the top surface clean. The difficulty is in the groove for the decimal markers. The Simplify3D support didn't work as well printed on a slanted surface.
div
The carriage casting was a real trick to print. This one had me stuck for about two months. It wasn't terribly difficult to get the initial print done: I printed it upside down to avoid support material. The problem was once I added in the digit axles and digit dials, it didn't align properly with the lower portion of the Curta. The digits would seat onto the transmission shaft crown gears, but they would not align with the carry levers properly. The alignment problem was also obvious from the spider spring whose fingers did not perfectly match up to the holes on the top of the casting.
div
Finally, I flipped the model over and printed it with the support I was avoiding. Something about the rotation re-aligned the ball bearing holes and digit axles to the rest of the Curta and to the spider spring. At first I thought rotating the model to eliminate support material caused some rounding error in the model, but after reviewing the CAD I realized that I had designed the part in the same orientation I originally printed it (there was no rotation for the original print). If anything, it seems like any rounding error encountered when rotating the part upside down should have thrown the reprint off further.
div
At this point I'm not 100% sure why flipping the part over helped, but I'm glad I discovered the workaround.
div
The carriage cage had the same issue as the carriage casting as far as alignment goes. It also had the same solution. However alignment wasn't the only issue I had with the carriage cage. The engineering drawing was somewhat difficult to interpret so it took a few iterations to get the right output. The threading on its lower outer edge where the carriage ring connects also required an extra iteration. The carriage ring didn't thread on nicely at first and I had to decrease the diameter of the threads about 0.2mm before it would.

digitaltorque.com IP Information:

1.

Ip Address:

71.68.2.131
2.

Country:

United States
3.

Status Code:

OK
4.

Region Name:

North Carolina
5.

City Name:

Gastonia
6.

Zip Code:

28054
7.

Speed test:

88.2 ms

digitaltorque.com Alexa Information:

5 Websites linking to digitaltorque.com:
thingiverse.com
digitaltrends.com
xataka.com
newatlas.com
3ders.org

Websites related to digitaltorque.com:
ddrfreak.com
arcadecontrols.com

Top Keywords from Search Engines:
3d printed curta, readium, 3d print curta, build openssl android x86, curta 3d print

Site Screenshots:

Screenshot created on Thursday 08. December 2016

This is a screenshot of digitaltorque.com, created on Thursday 08. December 2016
Click on thumb to enlarge the screenshot.

Google Ranking Screenshots:

Screenshot created on Thursday 08. December 2016

This is a Google Top 10 results' screenshot for keyword Software Developer created on Thursday 08. December 2016.
The position for keyword Software Developer is: Not in top 10
Google Ranking Position checked from US (United States of America) Ip Address on Thursday 08. December 2016.
Click on thumb to enlarge the screenshot.

digitaltorque.com Alternatives:

eigitaltorque.com
cigitaltorque.com
sigitaltorque.com
wigitaltorque.com
xigitaltorque.com
figitaltorque.com
rigitaltorque.com
vigitaltorque.com
d8gitaltorque.com
dkgitaltorque.com
dugitaltorque.com
d7gitaltorque.com
djgitaltorque.com
dogitaltorque.com
d9gitaltorque.com
dlgitaltorque.com
dititaltorque.com
dibitaltorque.com
difitaltorque.com
diritaltorque.com
divitaltorque.com
dihitaltorque.com
diyitaltorque.com
dinitaltorque.com
dig8taltorque.com
digktaltorque.com
digutaltorque.com
dig7taltorque.com
digjtaltorque.com
digotaltorque.com
dig9taltorque.com
digltaltorque.com
digi5altorque.com
digigaltorque.com
digiraltorque.com
digi4altorque.com
digifaltorque.com
digiyaltorque.com
digi6altorque.com
digihaltorque.com
digitqltorque.com
digitzltorque.com
digitsltorque.com
digitwltorque.com
digitxltorque.com
digitaotorque.com
digita.torque.com
digitaktorque.com
digitaitorque.com
digitaptorque.com
digital5orque.com
digitalgorque.com
digitalrorque.com
digital4orque.com
digitalforque.com
digitalyorque.com
digital6orque.com
digitalhorque.com
digitalt9rque.com
digitaltlrque.com
digitaltirque.com
digitalt8rque.com
digitaltkrque.com
digitaltprque.com
digitalt0rque.com
digitalto4que.com
digitaltofque.com
digitaltoeque.com
digitalto3que.com
digitaltodque.com
digitaltotque.com
digitalto5que.com
digitaltogque.com
digitaltor1ue.com
digitaltoraue.com
digitaltorwue.com
digitaltor2ue.com
digitaltorsue.com
digitaltorq7e.com
digitaltorqje.com
digitaltorqye.com
digitaltorq6e.com
digitaltorqhe.com
digitaltorqie.com
digitaltorq8e.com
digitaltorqke.com
digitaltorqu3.com
digitaltorqud.com
digitaltorquw.com
digitaltorqu2.com
digitaltorqus.com
digitaltorqur.com
digitaltorqu4.com
digitaltorquf.com
digitaltorque.dom
digitaltorque.xom
digitaltorque.som
digitaltorque.vom
digitaltorque.fom
digitaltorque.c9m
digitaltorque.clm
digitaltorque.cim
digitaltorque.c8m
digitaltorque.ckm
digitaltorque.cpm
digitaltorque.c0m
digitaltorque.coj
digitaltorque.con
digitaltorque.coh
digitaltorque.cok
digitaltorque.biz
digitaltorque.org
digitaltorque.info
digitaltorque.net
digitaltorque.com
digitaltorque.us
digitaltorque.in
digitaltorque.co.uk
digitaltorque.au
digitaltorque.ca
digitaltorque.kom

DOMAINS DATA